- 1. The three-way handshake consists of the following except:
A) SYN-ACK
B) RAT
C) SYN
D) ACK
- 2. Well-known applications that use TCP/IP data encapsulation, use port numbers 0 to:
A) 255
B) 2047
C) 1023
D) 49153
- 3. Port numbers on TCP header segments are extremely important because they enable a receiving host to forward data to the correct
A) application
B) user
C) IP address
D) domain
- 4. The OSI model transport layer is responsible for regulating the flow of information from source to:
A) destination
B) gateway
C) router
D) domain
- 5. Hosts that send data will continue sending data until that data is:
A) acknowledged
B) segmented
C) synchronized
D) multiplexed
- 6. In TCP data transfer, Flow Control is efficient because it prevents the receiver from being overwhelmed by incoming:
A) ports
B) acks
C) data
D) syncs
- 7. Layer 4 addressing identifies the communicating:
A) ports
B) applications
C) domains
D) users
- 8. Layer 4 addressing identifies multiple conversations between the:
A) domains
B) applications
C) hosts
D) ports
- 9. In Wireshark, if a user sees "SYN," "SYN, ACK," and "ACK," that user is actually seeing a SESSION being:
A) established
B) retransmitted
C) transferred
D) postponed
- 10. The "NETSTAT" command allows us to see a local host web session with a remote:
A) gateway
B) server
C) user
D) domain
- 11. When forwarding data, the source hosts dynamically selects the source:
A) gateway
B) address
C) connection
D) port
- 12. To provide flow control as segments travel from source to destination, TCP uses window:
A) sizing
B) establishment
C) acknowledgments
D) sequencing
- 13. The best protocol used to provide low overhead and applications that do NOT require reliable data delivery would be:
A) POP3
B) UDP
C) IP
D) TCP
- 14. TCP and UDP header information BOTH include:
A) sequencing
B) flow control
C) acknowledgements
D) source and destination ports
- 15. TCP uses the following 3 features to accurately track data transmission except:
A) session establishment
B) gateway correction services
C) numbering and sequencing
D) flow control
- 16. Remote hosts that receive packets out of order reorder and do what else with those packets?
A) retransmit
B) reconfigure
C) readdress
D) reassemble
- 17. UDP is a protocol which provides minimal delays in data:
A) delivery
B) management
C) sequencing
D) configuration
- 18. The destination port for HTTP services on remote Web servers is usually port:
A) 23
B) 80
C) 25
D) 53
- 19. During the 3-way handshake, TCP begins initializing the sessions' sequence:
A) numbers
B) connection
C) domains
D) users
- 20. Hosts that do not receive an ACK from the receiving server will continue doing what with the already sent data?
A) reconnect it
B) re-sequence it
C) reconfigure it
D) retransmit it
- 21. Whereas the average size of a UDP Datagram segment is 8 Bytes, a TCP segment is how many bytes?
A) 23
B) 25
C) 80
D) 20
- 22. The Port Number Range for Registered Ports is from 1024 to:
A) 49152
B) 0
C) 65535
D) 49151
- 23. The Port Number Range for "Private and/or Dynamic Ports" is from 49152 to:
A) 65535
B) 1024
C) 443
D) 0
- 24. The Well-Known TCP port for FTP is port:
A) 25
B) 80
C) 21
D) 23
- 25. The Well -Known TCP port for Telnet is port:
A) 23
B) 80
C) 21
D) 25
- 26. The Well-Known TCP port for Secure HTTP (HTTPS) is port:
A) 25
B) 443
C) 23
D) 21
- 27. The Well-Known UDP port for TFTP (Trivial FTP) crucial for cisco file transfer is port:
A) 443
B) 23
C) 69
D) 21
- 28. Which is the best Web site (180+ pages) suited to obtain more information about Port assignments?
A) port.org
B) superport.net
C) portnumber4me.com
D) iana.org
- 29. If Host A is sending a TCP message with the packets #43, 44, 45, 46, and all was well received, the ACK should have what number returning to the host?
A) 49
B) FIN
C) 46
D) 47
- 30. Window Sizing, 'sliding windows,' or Windowing, occurs when Flow Control detects too much congestion with the:
A) domain
B) gateway
C) router
D) receiver
|