A) extranet B) extendednet C) Internet D) intranet
A) cell modem B) satellite C) dial-up D) DSL E) cable modem
A) The entire command, configure terminal, must be used. B) The administrator must first enter privileged EXEC mode before issuing the command. C) The administrator must connect via the console port to access global configuration mode D) The administrator is already in global configuration mode.
A) Ctrl-Z B) Ctrl-Shift-X C) Ctrl-Shift-6 D) Ctrl-C
A) linevtyin B) letmein C) lineconin D) secretin
A) This command prevents someone from viewing the running configuration passwords. B) This command automatically encrypts passwords in configuration files that are currently stored in NVRAM. C) This command provides an exclusive encrypted password for external service personnel who are required to do router maintenance. D) This command encrypts passwords as they are transmitted across serial WAN links. E) This command enables a strong encryption algorithm for the enable secret password command.
A) The SVI provides a physical interface for remote access to the switch. B) The SVI adds Layer 4 connectivity between VLANs. C) The SVI provides a faster method for switching traffic between ports on the switch. D) The SVI provides a virtual interface for remote access to the switch
A) duplex B) unicast C) broadcast D) multicast
A) POP B) BOOTP C) ICMP, IP D) PPP
A) packet B) segment C) bits D) frame
A) It is segmented into smaller individual pieces. B) It is tagged with information guaranteeing reliable delivery. C) It is encapsulated in a Layer 2 frame D) It is encapsulated into a TCP segment.
A) fiber B) radio waves C) UTP D) microwave
A) signal modulation technique B) size of the network C) bandwidth D) crosstalk, electromagnetic interference
A) network access B) transport C) internet D) physical E) LLC,MAC
A) ring B) hierarchical C) star D) mesh E) bus
A) flow control B) message encoding C) message encapsulation D) access method
A) Layer 4 B) physical C) data link D) Layer 3
A) an IP address that is unique for each destination in the group B) a single IP multicast address that is used by all destinations in a group C) a group address that shares the last 23 bits with the source IPv4 address D) a 48 bit address that is determined by the number of members in the multicast group
A) drop the frame B) process the frame as it is C) send an error message to the sending device D) add random data bytes to make the frame 1518 bytes long and then forward it
A) source IP address B) Ethernet type C) source MAC address D) destination MAC address E) destination IP address
A) It broadcasts the frame out of all ports on the switch. B) It forwards the frame out of all ports except for the port at which the frame was received. C) It initiates an ARP request. D) It notifies the sending host that the frame cannot be delivered.
A) If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast. B) An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address. C) If no device responds to the ARP request, then the originating node will broadcast the data packet to all devices on the network segment. D) When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses. E) If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply
A) DNS B) DHCP C) SMTP D) WINS E) HTTP
A) user data segmentation B) reliable end-to-end delivery C) connectionless D) media dependent
A) fe80::30d0:115:3f57:fe4c/128 B) fe80::/64 C) 2001:0:9d38:6ab8:30d0:115:3f57:fe4c/128 D) ::1/128
A) ROM is nonvolatile and stores the running IOS. B) FLASH is nonvolatile and contains a limited portion of the IOS. C) RAM is volatile and stores the IP routing table. D) ROM is nonvolatile and contains basic diagnostic software. E) NVRAM is nonvolatile and stores a full version of the IOS.
A) 100.64.0.0/14 B) 10.0.0.0/8 C) 172.16.0.0/12 D) 169.254.0.0/16 E) 192.168.0.0/16
A) 2001:DB8:0:AB:0:1234 B) 2001:DB8:0:AB::1234 C) 2001:DB8::AB00::1234 D) 2001:DB8:0:AB00::1234
A) global unicast B) link-local C) unique local D) site local
A) all IPv6 configured routers on the local link B) all IPv6 enabled devices across the network C) all IPv6 DHCP servers D) all IPv6 enabled devices on the local link
A) to provide feedback of IP packet transmissions B) to monitor the process of a domain name to IP address resolution C) to ensure the delivery of an IP packet D) to inform routers about network topology changes
A) It is primarily used to test connectivity between two hosts. B) It sends four Echo Request messages. C) It utilizes the ICMP Source Quench messages. D) It identifies the routers in the path from a source host to a destination host
A) 32 B) 62 C) 254 D) 256 E) 64
A) 172.16.255.255 B) 172.16.23.255 C) 172.16.16.255 D) 172.16.19.255 E) 172.16.20.255
A) 10.1.1.128/28 10.1.1.140/28 10.1.1.158/26 B) 0.1.1.128/26 10.1.1.144/26 10.1.1.160/26 C) 10.1.1.128/26 10.1.1.140/26 10.1.1.158/28 D) 10.1.1.128/28 10.1.1.144/28 10.1.1.160/29 E) 10.1.1.128/28 10.1.1.144/28 10.1.1.160/28
A) 2001:db8:0:f000::/52 B) 2001:db8:0:f::/52 C) 2001:db8:0:8000::/52 D) 2001:db8:0:f00::/52
A) The data flow is being tracked based on the destination IP address used by the PC of the technician B) The data flow is being tracked based on the source IP address used by the PC of the technician. C) The data flow is being tracked based on the destination port number utilized by each application. D) The data flow is being tracked based on the source port number utilized by each application
A) error recovery B) connection establishment C) encryption of data D) data representation E) flow control
A) A delivery failure message is sent to the source host. B) The transmission continues without the missing portion. C) The entire transmission is re-sent. D) The part of the television transmission that was lost is re-sent.
A) session B) presentation C) internet D) network E) transport
A) master B) slave C) transient D) client E) server
A) physical address of the recipient B) physical address of the sender C) subnet mask D) local server address E) default gateway address
A) during employee holidays and weekends B) during off-peak hours C) during times of peak utilization D) during randomly selected times
A) discovery and mapping of systems B) unauthorized manipulation of data C) disabling network systems or services D) denying access to resources by legitimate users
A) All login attempts will be blocked for 4 hours if there are 90 failed attempts within 150 seconds B) All login attempts will be blocked for 90 seconds if there are 4 failed attempts within 150 seconds. C) All login attempts will be blocked for 1.5 hours if there are 4 failed attempts within 150 seconds. D) All login attempts will be blocked for 150 seconds if there are 4 failed attempts within 90 seconds.
A) Nothing can be determined for sure at this point B) The TCP/IP protocol is not enabled C) The NIC in the PC is bad. D) The router that is attached to the same network as the workstation is down.
A) Ctrl+x B) Ctrl+c C) Ctrl+Esc D) Ctrl+Shift+6
A) The configuration files can be stored to a flash drive that uses any file system format. B) The USB flash drive is more secure. C) The transfer of the files does not rely on network connectivity. D) The files can be saved without using terminal emulation software. |