- 1. 1. Which principle states that for a body to be in equilibrium, the sum of the clockwise moments about any point must be equal to the sum of the anticlockwise moments?
A) Principle of Equilibrium
B) Newton's Second Law
C) Newton's First Law
D) Principle of Moment
- 2. 2. Which condition must be satisfied for a rigid body to be in equilibrium under the action of parallel forces?
A) The sum of the forces must be zero.
B) The sum of the forces and moments must be non-zero.
C) The sum of the moments must be zero.
D) The sum of the forces and moments must be zero.
- 3. 3. According to Newton's First Law of Motion, an object will remain at rest or continue to move at a constant velocity unless acted upon by a(n):
A) External force
B) Internal force
C) Balanced force
D) Unbalanced force
- 4. 4. Which term refers to a pair of forces that have equal magnitudes, opposite directions, and act along different lines of action?
A) Couple
B) Equilibrium
C) Moment
D) Torque
- 5. 5. Which law states that the rate of change of momentum of an object is directly proportional to the net force applied to it and occurs in the direction of the force?
A) Newton's Second Law
B) Newton's Third Law
C) Newton's Law of Gravitation
D) Newton's First Law
- 6. 6. What is the term for the repetitive back-and-forth motion of an object about an equilibrium position?
A) Simple Harmonic Motion
B) Damping
C) Forced Vibration
D) Resonance
- 7. 7. What is the term for the phenomenon that occurs when an external force is applied to an object at its natural frequency, causing a large amplitude vibration?
A) Resonance
B) Forced Vibration
C) Simple Harmonic Motion
D) Damping
- 8. 8. __________ is the amount of heat energy required per unit mass to raise the temperature of a substance by 1 degree celsius.
A) Latent Heat
B) Thermal Conductivity
C) Heat Capacity
D) Specific Heat Capacity
- 9. 9. Which method is commonly used to determine the specific heat capacity of a substance?
A) Calorimetry
B) Radiometry
C) Thermodynamics
D) Spectroscopy
- 10. 10. __________ is the formula to calculate the heat energy transferred to a substance?
A) QT = mc∆v
B) Q = mcΔT
C) QT = mcv
D) Q∆T = mcv
- 11. 11. Which law states that energy cannot be created or destroyed, only transferred or transformed from one form to another?
A) Law of Conservation of Momentum
B) Law of Conservation of Energy
C) Law of Conservation of Angular Momentum
D) Law of Conservation of Mass
- 12. 12.What is the term for the collision between two objects where the total kinetic energy before and after the collision remains constant?
A) d) Conservation Collision
B) Elastic Collision
C) Perfectly Inelastic Collision
D) Inelastic Collision
- 13. 13. The force that opposes the motion of an object in simple harmonic motion is called the __________
A) Density force
B) Damping force
C) Net force
D) Frequency force
- 14. 14. Which law of motion states that for every action, there is an equal and opposite reaction?
A) Newton's Second Law
B) Law of Inertia
C) Newton's Third Law
D) Newton's First Law
- 15. 15. The conservation of linear momentum holds true:
A) Only in inelastic collisions
B) In all collisions
C) Only in elastic collisions
D) Only in explosions
- 16. 16. The SI unit of heat energy is:
A) Newtons
B) Calories
C) Joules
D) Watts
- 17. 17. Find the quantity of heat required to raise the temperature of 500g of copper from 16⁰C to 116⁰C [ assuming that the specific heat capacity of copper = 400J/kg].
A) 400kJ
B) 2kJ
C) 24kJ
D) 20kJ
- 18. 18. The maximum displacement from the equilibrium (central) point is the _____
A) Period
B) Frequency
C) Amplitude
D) Vibration
- 19. 19. Which of the following equations is for when two bodies move in the same direction before and after collision
A) m1 u1 - m2 u2 = m1v1 + m2v2
B) m1 u1 - m2 u2 = m1v1 - m2v2
C) m1 u1 + m2 u2 = m1v1 - m2v2
D) m1 u1 + m2 u2 = m1v1 + m2v2
- 20. 20. A force acting on a body causes a change in the momentum of the body from 12kgms-1 to 16kgms-1 in 0.2s. Calculate the magnitude of the impulse.
A) 4.0Ns
B) 36Ns
C) 28.0Ns
D) 0.8Ns
- 21. 21. The property of a body to remain at rest or to continue in a uniform motion in a straight line is called __________
A) Energy
B) Impulse
C) Inertia
D) Momentum
- 22. 22. __________ is the inward force required to keep an object moving with a constant speed in a circular path.
A) Oscillation force
B) Centripetal force
C) Centrifugal force
D) Angular force
- 23. 23. The frequency of a simple harmonic motion refers to the:
A) Number of cycles per unit time
B) Maximum displacement
C) Rate of change of displacement
D) Time taken for one complete cycle
- 24. 24. _______ is the SI unit of force
A) Joule
B) Newton
C) Kelvin
D) Celsius
- 25. 25. The to and fro motion of a ball passed repeatedly between two footballers is _______
A) Not a Simple harmonic motion
B) Partially a simple harmonic motion
C) All of the above
D) A simple harmonic motion
- 27. 27. The quantity of heat required to raise the temperature of the whole of a substance through 1K is _____
A) Thermal energy
B) Heat Capacity
C) Thermal Conductivity
D) Specific Heat Capacity
- 28. 28. _______ is a single force acting alone, which will have the same effect in magnitude and direction as those forces acting together.
A) Resultant force
B) Recurring force
C) Equilibrant
D) Restoring force
- 29. 29. The turning effect produced by a force is known as the _______
A) Principle of force
B) Moment of force
C) Vertical component of a force
D) Equilibrium of a force
- 30. 30. Turning of a tap with our fingers is an application of a _____
A) Force
B) Velocity
C) Circular Motion
D) Couple
- 31. 31. An immersion heated is rated 1500W. How long does it take the heater to raise the temperature of 1kg of water by 30⁰C? ( Assume heat lost to the surrounding is negligible. Specific heat capacity of water = 4200J kg-1k-1
A) 280s
B) 130s
C) 112s
D) 84s
- 32. 32. A ball resting on a smooth horizontal table is in ____
A) Neutral Equilibrium
B) Stable Equilibrium
C) Static and Neutral Equilibrium
D) Unstable Equilibrium
- 33. 33. A dam is able to hold a large quantity of water because its wall is ____
A) thickest at the bottom
B) thickest at the top
C) thickest at the middle
D) of the same thickness throughout
- 34. 34. _____ is equal to the product of the force and the perpendicular distance from the line of action of the force to that point.
A) Resultant of a force
B) Masses of a force
C) Moment of a force
D) Equilibrant of a force
- 35. 35. The number of cycles per second is ______
A) Amplitude
B) Period
C) Resonance
D) Frequency
- 36. 36. Spring balance is used to measure ___
A) Velocity
B) Distance
C) Weight
D) Mass
- 37. 37. The point where the weight of an object is concentrated is known as ___
A) Centre of pull
B) Centre of force
C) Centre of gravity
D) Centre of weight
A) 5000
B) 0.5
C) 0.05
D) 500
- 39. 39. A car travelled a distance of 4km in 40secs. Find the speed in metre per second (m/s)
A) 0.4m/s
B) 0.1m/s
C) 100m/s
D) 0.004m/s
- 40. 40. A ticker-timer used ⅕secs to 8cm. What is the velocity?
A) 40cm/s
B) 0.04cm/s
C) 1.6cm/s
D) 0.4cm/s
|