- 1. Heat is generated when a gas is compressed in a container or cylinder.
A) all of these
B) heat of compression
C) none of these
D) heat of friction
- 2. any substance which reacts chemically with oxygen and produces flames. The most important element of fire.
A) Gasoline
B) Fuel
C) Heat
D) Oxygen
- 3. It is the most common source of heat in combustion reactions. When any combustibles are in contact with oxygen oxidation occurs. The reaction of this process results in the production of heat. Examples: Heat generated from a burning match, Self-heating (spontaneous heating).
A) mechanical energy
B) electrical energy
C) nuclear energy
D) chemical energy
- 4. a form of energy generated by the transmission of some other form of energy, as in combustion or burning.
A) Gasoline
B) Heat
C) Fuel
D) Oxygen
- 5. It can generate temperatures high enough to ignite any combustible materials near the heated area.
A) chemical energy
B) electrical energy
C) nuclear energy
D) mechanical energy
- 6. molecules are closely packed together
A) Liquid
B) Nitrogen
C) Solid
D) Gas
- 7. It is generated when atoms either split apart (fission) or combine (fusion).
A) mechanical energy
B) chemical energy
C) electrical energy
D) nuclear energy
- 8. How many percent of oxygen are in normal air?
A) 78%
B) 16%
C) 21%
D) 1%
- 9. Is a self-sustaining chemical reaction producing energy or products that cause more reactions of the same kind.
A) Fire point
B) Flash point
C) Fire
D) combustion
- 10. It is a product of a fusion reaction (a form of nuclear energy).
A) nuclear energy
B) electrical
C) solar energy
D) friction
- 11. How many percent of nitrogen are in normal air?
A) 1%
B) 16%
C) 21%
D) 78%
- 12. molecules are loosely packed
A) Gas
B) Liquid
C) Nitrogen
D) Solid
- 13. a colorless, odorless gas and one of the compositions of air which is approximately 21% by volume.
A) Fuel
B) oxygen
C) Heat
D) Gasoline
- 14. The final phase of burning wherein flame ceases but dense smoke and heat completely fill the confined room. •
A) burning stage
B) Incipient/Beginning phase
C) Free-Burning Phase
D) Smoldering Phase
- 15. The supply of the fuel or material is cut off.
A) smoothering
B) blanketing
C) Cooling
D) Starving
- 16. The oxygen content of air is reduced below 15% in volume by using chemicals, water, fog, sand blankets, etc.
A) Smothering or Blanketing
B) Cooling
C) Thristing
D) Starving
- 17. The temperature of the substance is lowered below the burning point by using water or a water solution.
A) Cooling
B) Blanketing
C) Smoothering
D) Starving
- 18. shavings, grindings, granules, or dust. Some liquid metals are kept in a liquid state under pressure. Usually, these liquid metals are extremely dangerous. Some of the more unusual metals are sodium, magnesium, titanium, sodium potassium, and uranium as well as pyrophoric organometallic reagents such as alkyl lithium, grog nards, and diethyline. These types of materials burn at high temperatures and will react violently with water, air, and/or other chemicals
A) Class C
B) Class A
C) Class D
D) Class B
- 19. This type of fire involves electrical motors, electrical appliances, and apparatus. Actually, a Class C fire is composed usually of Class A and Class B materials or a combination of both. The use of water is usually dangerous because of the risk of electrical shock.
A) Class c
B) Class A
C) Class D
D) Class B
- 20. Materials including petroleum products such as gasoline, fuel oils, lubricating oils, and greases; animal fats such as butter, lard, and tallow; vegetable extracts such as alcohol, linseed oil, and turpentine; vegetable compounds such as shortenings and oleomargarines; natural gases and compressed gases such as butane, propane, hydrogen, and acetylene
A) Class B
B) Class C
C) Class A
D) Class D
- 21. Materials involving vegetable fibers, wood, paper straw, grain, and grass; combustible minerals such as coal and coke. Nearly all thrash fires are considered?
A) Class A
B) Class B
C) Class D
D) Class C
- 22. Occurs when a room or other area is heated enough that flames sweep over the entire surface. Firefighters originally believed that combustible gases released during the early stages of the fire cause flashover by collecting at the ceiling and mixing with air until they burst into flames.
A) oxidation
B) Fire point
C) flash over
D) backdraft
- 23. Any action taken during firefighting operations that allows air to mix with these hot gases can result in an explosive ignition called?
A) Oxidation
B) Flashover
C) Backdraft
D) Fire point
- 24. It is the point where ignition actually occurs, flames
A) Smoldering or smoke stage
B) Flame Stage
C) Incipient Stage
D) flames • Heat, Conflagration, or Explosion stage
- 25. This stage closely follows the flame stage, and once this stage is reached the fire can normally be said to be out of control.
A) Flame Stage
B) Smoldering or smoke stage
C) Heat, Conflagration, or Explosion stage
D) Incipient Stage
- 26. The final phase of burning wherein flame ceases but dense smoke and heat completely fill the confined room.
A) Free-Burning Phase
B) Free-Burning Phase
C) Smoldering Phase
D) Incipient/Beginning phase
- 27. The second phase of burning in which materials or structures are burning in the presence of adequate oxygen.
A) Smoldering Phase
B) Incipient/Beginning phase
C) Free-Burning Phase
D) Flame Stage
- 28. is the initial stage of fire.
A) Flame Stage
B) Incipient/Beginning phase
C) Free-Burning Phase
D) Smoldering Phase
- 29. It iswhich made the fire started?
A) none of these
B) cause
C) Reason
D) all of these
- 30. It iswhich made the fire started?
A) Cause
B) reason
C) All of these
D) none of these
- 31. One of the most difficult problems to solve is to determine the cause of the fire since the flames generally consume any evidence of what occurred
A) All of these
B) True
C) Maybe
D) False
- 32. No matter how small, the fire must be investigated
A) False
B) None of these
C) True
D) Maybe
- 33. These are the ways to extinguish fire, except one?
A) supply fuel
B) Reduce the temperature
C) Remove the fuel
D) Cut off the oxygen supply
- 34. means showing down the rate of burning, whereas, control means keeping the fire from spreading or holding the fire to one area. Extinguishment is putting the fire completely out.
A) fire supression
B) All of these
C) fire extinguisher
D) fire control
- 35. The removal of the fuel, as in the example of turning off a valve in a gas line prevents the fuel and oxygen from coming together. If fuel is not available, then heat, regardless of the temperature, cannot affect the fuel,
A) Separation
B) Cooling
C) smoothering
D) chemical chain reaction
- 36. Excludes the oxygen from the fuel so that the gases or vapors of the fuel cannot ignite and continue the combustion. CO2 and AFFF are used for this purpose.
A) Separation
B) Cooling
C) chemical chain reaction
D) smoothering
- 37. It is the best general cooling agent for firefighting purposes.
A) Fuel
B) Air
C) Oxygen
D) Water
- 38. It is aprocess uses an extinguishing agent whose primary characteristic, is heat absorption.
A) Separation
B) Smothering
C) Blanketing
D) Cooling
- 39. Determine where the fire vested first by comparing burn char, smoke, and heat patterns around windows, doors, and roofs.
A) Exterior
B) Interior
C) All of these
D) None of these
- 40. fires which are not classified as to cause.
A) Unknown fire
B) Accidental fire
C) Natural fire
D) Arson
- 41. The fire was caused as a result of the willful and criminal activities of some persons, i.e., incendiary fire.
A) Accidental fire
B) Natural fire
C) Arson
D) Unknown fire
- 42. fire causes where human action is involved directly or indirectly. i.e., a). Careless disposal of smoking materials; b). workers using welding-cutting equipment
A) Arsonist
B) natural fire
C) Accidental fire
D) Arson
|